banner



Home  ›  Csn I Repair A Foreman Grilk?

Csn I Repair A Foreman Grilk?

Written By Monday 21 February 2022 Add Comment Edit

George Foreman Wire Repair

  • Comments: 0
  • Favorites: 0
  • Completions: 1

  • George Foreman Wire Repair half-dozen steps

Introduction

The disconnection between wires or loose wiring could be a cause for the George Foreman to non estrus up to a sufficient temperature to cook. This guide gives step past footstep instructions and visual aids to help the wire connectedness to this appliance. With the assist of this guide, y'all will have the confidence that if your grill were to malfunction, a few unproblematic steps volition have it upwards and running again in no time!

Parts

No parts specified.

  1. Make sure the appliance is unplugged and cooled off before beginning the repair.

    • Brand sure the appliance is unplugged and cooled off before beginning the repair.

    • If the appliance is even so on, this could pb to safe hazards such as burning of the paw or electrocution.

    • Lights volition announced lit if the appliance is all the same on so make sure the lights are non illuminated.

  2. Open the appliance by lifting the top plate away from you.

    • Open the apparatus past lifting the top plate away from you.

  4. Remove the plates by pushing down on the black knobs on either side of the plates, top and bottom. After, pick up and lift the plates off of the appliance.

    • Remove the plates by pushing down on the black knobs on either side of the plates, top and lesser.

    • After, selection upward and lift the plates off of the appliance.

  5. Underneath where the plates sit you will see a coil and 12 screws holding the base plate in place. Remove the 12 Phillips head screws on the bottom plate with a #1 Phillips head screw driver. Remove the 12 Phillips head screws on the bottom plate with a #1 Phillips head screw driver.

    • Underneath where the plates sit down yous will meet a coil and 12 screws property the base of operations plate in place.

    • Remove the 12 Phillips head screws on the bottom plate with a #1 Phillips head screw driver.

  6. After unscrewing the screws, lift off the base plate.

    • After unscrewing the screws, elevator off the base plate.

    • This is where you will see the wires.

  7. Re-establish the disconnected or loose wires by pushing them back into the point of connection. Push the wires into the connection center on the bottom of the plate until you can't anymore. This is how you know they will not come loose again.

    • Re-establish the disconnected or loose wires past pushing them back into the indicate of connection.

    • Push the wires into the connexion center on the bottom of the plate until you lot tin't anymore. This is how you know they will not come loose again.

    • Brand sure to keep the wires separated and so they exercise not affect and go tangled to avoid sparks and electrocution.

Conclusion

To reassemble your device, follow these instructions in contrary order.

Ali Sealby

Member since: 07/02/2018

163 Reputation

1 Guide authored

Team

0 Comments

Source: https://www.ifixit.com/Guide/George+Foreman+Wire+Repair/111851

Posted by: legendreclorge79.blogspot.com

0 Response to "Csn I Repair A Foreman Grilk?"

Post a Comment

Subscribe to: Post Comments (Atom)

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel